I do have a cargo mat for your 2014 Dodge ProMaster 2500 with the 159" wheelbase but the VanTred Custom Floor Mat for Cargo Vans part # VTMM16 is not a confirmed fit. Instead, you will want to use the VanTred Custom Floor Mat for Cargo Vans part # VTDP14L which is the same type of mat you inquired about but is the confirmed fit for your vehicle.
The VanTred Custom Floor Mat is made of a 1/2" thick heavy-duty thermoplastic which is black in color. This mat works to repel liquids in addition... view full answer...
We have a perfect solution for you! The SnapPad kit part # SP54FR6 is for 9 inch diameter feet pads and comes as a kit of 6 like what you are wanting so it's a perfect solution. view full answer...
The Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75882 referenced in your question is confirmed to fit the 2015 Dodge ProMaster 2500, as long as it is not the EXT model. This Draw-Tite Hitch does provide the highest tongue weight capacity of 750 pounds and towing capacity of 6,000 pounds available for trailer hitches confirmed to fit this vehicle. I have attached an installation video on a 2014 ProMaster 2500 for you to check out.
This trailer hitch does not include a wiring... view full answer...
Yes, the Tekonsha 7-way kit part # 22112 that you referenced is a confirmed fit for your 2014 Dodge Promaster 2500 with the 159 inch long wheelbase as well. This will give you a fully functional 7-way. view full answer...
Typically trailer leaf springs will have a hanger distance recommended for them. What you'd want to do most likely is use that dimension with the current axle center dimension your trailer has so that you can install the new axles in the same location as your old axle.
Basically you want to locate the axle so that you end up with the tongue weight of the trailer being 10-15 percent of the total trailer weight. view full answer...
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow, this figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached an FAQ on determining tongue weight for you to check out as well.
Typically tongue weight is 10-15 percent of the total trailer weight. That means your loaded tongue weight will be most likely 770 lbs to 1,155 lbs which would be a perfect... view full answer...
The Kuat Pivot Swing Away Hitch Extender part # PVP20B is designed specially to be used with the Kuat NV 2.0, NV Base 2.0, and Sherpa 2.0 bike racks. However, I don't see any reason that you could not use the swing hitch extender with a hitch mounted spare tire holder like the Curt Trailer Hitch Mounted Spare Tire Carrier part # C31006 so long as the weight of the spare tire holder and the weight of your spare tire/wheel do not exceed 250 lbs even on rough terrain. The weight of your spare... view full answer...
Go To Results